How To Clean A Sink Faucet Head: Step-By-Step Guide

It is highly important to give your bathroom and kitchen sinks a deep clean frequently to maintain hygiene and cleanliness. However, the work extends beyond just the basin. It is must to give the same level of attention to the faucet head. Similar to the other parts of your sink, these specific areas are known to accumulate stains, bacteria, and smudges. The faucet head is sensitive to mineral buildup and hard water deposits, which has a major impact on your water flow. To guarantee these parts always look and work at their best, it is important to make cleaning them a part of your routine. Additionally, it is best to use a tried and tested method that professionals use for professional end of lease cleaning Melbourne. In this guide, we will go over a step-by-step process for cleaning a sink faucet head. Follow it to complete the job swiftly.

Gather the Necessary Supplies

To ensure you are well-equipped and ready to tackle the cleaning tasks, it is crucial to collect the appropriate supplies. Here are the ones you need:

• Mild dish soap
• Plastic bag
• Distilled white vinegar
• Rubber band
• Handheld steamer
• Toothbrush
• Non-scratch sponge or soft-bristle brush

Once you get all of these materials, you can move on to the next step.

Use Soap to Clean the Faucet Head

The use of mild dish soap along with a soft-bristle brush or a non-scratch sponge will prevent the minerals from gathering around the faucet head when used regularly. An ideal time to do this is when the faucet is damp, such as when steam has gathered right after a shower in the bathroom. In the kitchen, the ideal time is when you have done the dishes in the sink.

Clean the Faucet Head with Steam

To tackle hard water spots, rust buildup, or limescale, expert end of lease cleaners Melbourne recommend steam cleaning. A handheld steamer, along with a soft-bristled attachment, facilitates easy removal of buildup without causing any damage to the finish. It also will not require the use of chemicals to get the job done.

Make Use of White Vinegar

Distilled white vinegar is quite a popular cleaning solution in many households and is also used frequently by experts for the best end of lease cleaning Melbourne. However, it is a must to practice caution when using it on faucet heads. While it is true that steel can handle robust chemicals and acids, top coatings, such as the ones found in modern bronze and gold faucets, cannot do the same. The white cleaning vinegar is quite a strong acid as it has a pH of 2.5. It might be effective at getting rid of dirt and grime that is visible on the faucet or showerhead, but it also has the ability to dissolve the finish from the hardware. This will leave it looking dull. So, confirm whether your faucet can handle white vinegar or not. If it can, follow the process below:

• Prepare the cleaning solution by filling a bag with equal parts white vinegar and water.
• Ensure the faucet head is submerged and secure the bag to the faucet using a rubber band.
• Let it soak by waiting for about 30 minutes.
• Remove the bag.
• Run the faucet to remove anything loosened in the head.
• Finish with thoroughly rinsing and drying.

Properly Clean the Faucet Aerator

If you spot inconsistent water flow or if the faucet only has a partial spray, professional end of lease cleaners recommend cleaning the aerator in the faucet head to ensure water efficiency. Follow these steps for the same:

Step 1: Use a Toothbrush for Scrubbing

During the initial cleaning methods, remember to use a soft-bristle brush or an old toothbrush, as that will loosen up the mineral deposits on the screen of the aerator.

Step 2: Remove Aerator

If the previous step didn’t work, try to figure out if the aerator is removable or not. If it is, either cover or close the drain to ensure you do not lose any pieces. Next, remove the aerator while being attentive to note the order of the pieces.

Step 3: Let the Aerator Soak in Vinegar

Let the aerator soak in a solution made with a mixture of equal parts vinegar and water.

Step 4: Scrub the Aerator

Utilise a brush to remove whatever is caught in the aerator’s screen. Finally, assemble the faucet by putting everything back together.

Do’s and Don’ts Of Cleaning Sink Faucet Heads

Understanding the correct cleaning practices can make a substantial difference in preserving the faucet’s longevity and performance. Sticking to some do’s while strictly avoiding don’ts will ensure the faucet head is clean and does not get damaged. Here are the do’s:

• Clean the faucet heads at least once a month.
• Prefer using mild cleaning solutions, ideally DIY options.
• Regularly conduct inspections and look for any signs of loose parts, leaks, or even unusual water flow and deal with these issues promptly.

Here are the don’ts:

• For cleaning, do not use harmful chemicals, as they can cause damage to the faucet’s finish.
• When reattaching the faucet head, be gentle to avoid over-tightening.
• Do not skip frequent cleaning, as that might lead to mineral buildup, which will be harder to eliminate.

Wrapping Up

Keeping your sink faucet head clean is an integral part of household hygiene while also ensuring ideal functionality in your bathroom or kitchen. Utilise the tips and steps from this article to maintain a visually appealing and functioning sink faucet head.